DTF TRANSFERS PRINTS INFORMATION

1 METER GANGSHEET SIZE : 100 CM X 54 CM 

DO NOT MIRROR ARTWORK FILES 

ARTWORK FILE SHOULD BE TRANSPARENT (NO BACKGROUND)

ARTWORK MUST BE HIGH RESOLUTION 300DPI 

APPLICATION SURFACES

It can be used on different materials, such as 100% cotton, 100% polyester, cotton/poly blends, tri-blends, canvas, Lycra®, spandex, elastane, Jeans, Leather, and more. 

PRESSING DETAILS

150°c for 10 seconds

Medium pressure or 2PSI

Warm peel

CURING

Curing is optional. If you do wish to cure the print, please put a Teflon or silicone sheet between the print and the heat plate. Press for 5 seconds. Carefully remove the sheet to reveal your repressed print

HEAT PRESS / IRON INSTRUCTIONS

Please note: DTF printing is best suited for use with heat presses (including small handheld presses).

If using household iron, ensure you have turned off the steam. Turn iron to highest setting. Cover the garment with silicone or Teflon sheet, place the print and apply firm pressure. Move iron in a circular motion evenly over the print. This will take 20-25 seconds for larger prints. 10-15 seconds for A5 or smaller. Wait 10 seconds and carefully (slowly) peel the print off. If any edges do not come off easily apply some heat again and repeat

WASHING INSTRUCTIONS

• Wash at 30° or 40° cycle
• Do NOT use harsh detergents
• ⁠if possible avoid tumble drying, hang or lay flat to dry
• ⁠do not iron on the print, turn garment inside out